Dual Adjustable Power Supply Circuit

This is the circuit diagram of a dual adjustable power supply using IC’s LM 317 & LM 337.LM 317 is able to deliver a maximum of 1.5 A at a range of 1.2 V to +30V .LM 337 is the negative complement of LM317.They also have a built in short circuit protection.

Here the circuit is wired to produce a dual adjustable output of ( +15 , 0 , -15 ).The capacitors C1 to C8 provides filtering and ripple rejection.Resistors R1 & R2 controls output of LM 317.Resistors R3 & R4 controls the output of LM 337 .R1 and R4 can be turned to vary the positive and negative voltages.This circuit is a must on an electronic hobbyists workbench.

Circuit Diagram :-

Micowave Engineering May June 2011 (BTE Delhi)

Question of Microwave Engineering (May/June 2011) is Submitted by Preetam Singh. We would like to thanks him for helping the students !!!

 

 DOWNLOAD THE COMPLETE PAPER 

 

15W Audio Amplifier Circuit (Class B)

The circuit shown here is of a simple Class-B audio amplifier based on op-amp TL082, transistors TIP41 and TIP42. LM833 is a dual op-amp with high slew rate and low distortion particularly designed for audio applications. This audio amplifier circuit can deliver 15 watt audio output into an 8 ohm speaker at +12/-12V DC dual supply.

Both op-amps in the IC are used here. IC1a is wired as a buffer and capacitor C3 does the job of input DC decoupling. Ic1b is wired in the inverting mode and it provides negative feedback. Complementary power transistors TIP41 and TIP42 are wired in the Class B push pull scheme and they drives the loud speaker. Diode D1 provides 0.7V bias voltage for the push pull pair and capacitor C2 protects the 0.7V bias voltage across D1 from heavy voltage swings at the IC1b’s output.

 Circuit Diagram of 15watt Class B Audio Amp :-

EDC III (May / June 2011) Question Paper

DOWNLOAD IT !!

Digital voltmeter using ICL7107

Description.

The circuit given here is of a very useful and accurate digital voltmeter with LED display using the ICL7107 from Intersil. The ICL7107 is a high performance, low power, 3.5 digit analog to digital converter. The IC includes internal circuitry for seven segment decoders, display drivers, reference voltage source and a clock. The power dissipation is less than 10mW and the display stability is very high.

Funcation Genrator Circuitusing IC 8038

Description.

The ICL8038 is a function generator chip, capable of generating triangular, square , sine, pulse and sawtooth waveforms. From these sine, square & triangular wave forms can be made simultaneously.There is an option to control the parameters like frequency,duty cycle and distortion of these functions.This is the best function generator circuit for a beginner to start with and is of course a must on the work bench of an electronics hobbyist.The circuit here is designed to produce waveforms from 20Hz to 20 kHz.The ICL 8038 has to be operated from a dual power supply.

Circuit Diagram & Part list

DIGITAL SYSTEM DESIGN by M.Morris Mano & Michael D.ciletti

TINA Design Suite v8.0 - PCB Industrial version

TINA Design Suite is a powerful yet affordable circuit simulation and PCB design software package for analyzing, designing, and real time testing of analog, digital, VHDL, MCU, and mixed electronic circuits and their PCB layouts.

You can also analyze SMPS, RF, communication, and optoelectronic circuits; generate and debug MCU code using the integrated flowchart tool; and test microcontroller applications in a mixed circuit environment. A unique feature of TINA is that you can bring your circuit to life with the optional USB controlled TINALab II hardware, which turns your computer into a powerful, multifunction T&M instrument. Electrical engineers will find TINA an easy to use, high performance tool, while educators will welcome its unique features for the training environment.

ELECTRONIC WATCHDOG

Here’s an electronic watchdog for your house that sounds to inform you that somebody is at the gate.  :D :))))

Circuit Diagram, Arrangement & Component Data (Rx & Tx)

 The circuit comprises a transmitter unit and a receiver unit, which are mounted face to face on the opposite pillars of the gate such that the IR beam gets interrupted when someone is standing at the gate or passing through it.

How to Delete, Modify or Disable an Incorrect or Duplicate Entry on the XP Boot Menu

There are two options to get around this: You can remove the offending boot menu item, or you can just turn off the boot menu from being displayed. If you aren’t tech savvy, you’ll want to just use the second option.

Removing an Incorrect Boot Menu Option on XP

Note: This method involves modifying a very important boot configuration file. You should proceed with caution and always make sure you have backups of your files just in case something goes wrong.

All of the boot menu options in Windows XP are stored in the boot.ini file in the root of your boot drive, usually the C: drive. You’ll need to first set the file to be writeable by using the attrib command from the command prompt: